hondaboy4life

hey, sorry but these are pretty easy Q's i searched a bit but couldnt find anything so sorry if the answers are in some really place that i missed. I just picked up a obd1 gsr with b16 head for my 1993 civic si hatch. now to the q's

I have power steering in my car but the motor i came with doesnt have a bracket or anything. Will my d series power steering mount match up to my gsr block by any chance? i know most d series parts and b series arnt interchangable but was just wondering.

Also, what exactly do i have to wire in since i already have vtec? knock and iab or something? does anyone hav a good link to a diy for the wiring? or point me in the right direction?

I am sure i will have more q's so ill just post them, but if anyoen could help me that'd be great.

HondaPartsHero

You'll have to wire in for the knock sensor(unless you use a chipped P28 ECU). You won't need IAB wired in if it has a B16 head.

hondaboy4life

alright, so all i need to do is wire in knock. Can someone post a link or tell me how to do this

also still need to know about power steering mount

HondaPartsHero

http://www.ff-squad.com/technet/

this will give the pinout locations, just find a plug for the knock sensor and run wire from it to the ECU get an extra ECU small pin and plug it in.