obd2 to obd1
Thread Starter
I'm a Jackass
Joined: Sep 2004
Posts: 2,404
Likes: 0
From: eastwick, nj
obd2 to obd1
im doin an obd2 to obd1 conversion in my car, and whated to now what sensors from the obd2 that i dont need are. i searched and couldn't find what i was lookin for. If some one could tell me, it would be helpfull
Member
Joined: Feb 2002
Posts: 5,962
Likes: 0
From: at the track
Re: obd2 to obd1 (turbofienD 04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbofienD 04 »</TD></TR><TR><TD CLASS="quote">i know obd1 has one o2 sensor, but what other sensors are on obd2 that are not on obd1?</TD></TR></TABLE>
secondary o2, crank position sensor, fuel tank pressure sensor, i believe there is also an extra evap sensor near the intake manifold.
obd2 = the devil
secondary o2, crank position sensor, fuel tank pressure sensor, i believe there is also an extra evap sensor near the intake manifold.
obd2 = the devil
Trending Topics
Member
Joined: Feb 2002
Posts: 5,962
Likes: 0
From: at the track
Re: obd2 to obd1 (turbofienD 04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbofienD 04 »</TD></TR><TR><TD CLASS="quote">ok thanks and do i need a knock sensor?</TD></TR></TABLE>
Chipped p28 doesnt look for one unless the person who made the program added a provision for it.
Chipped p28 doesnt look for one unless the person who made the program added a provision for it.
Honda-Tech Member
Joined: May 2001
Posts: 3,820
Likes: 1
From: Surrey, BC, Canada
Re: obd2 to obd1 (743power)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 743power »</TD></TR><TR><TD CLASS="quote">
Chipped p28 doesnt look for one unless the person who made the program added a provision for it.</TD></TR></TABLE>
Need more than just software changes. Knock on a P28 needs hardware mods to the ECU (knock board, etc...)
Chipped p28 doesnt look for one unless the person who made the program added a provision for it.</TD></TR></TABLE>
Need more than just software changes. Knock on a P28 needs hardware mods to the ECU (knock board, etc...)
Member
Joined: Feb 2002
Posts: 5,962
Likes: 0
From: at the track
Re: obd2 to obd1 (Jaker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jaker »</TD></TR><TR><TD CLASS="quote">
Need more than just software changes. Knock on a P28 needs hardware mods to the ECU (knock board, etc...)</TD></TR></TABLE>
damn, too much work for a honda knock sensor. . .
Need more than just software changes. Knock on a P28 needs hardware mods to the ECU (knock board, etc...)</TD></TR></TABLE>
damn, too much work for a honda knock sensor. . .
Thread
Thread Starter
Forum
Replies
Last Post