no rpm after obd2 to obd1 swap
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: calgary, alberta, canada
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
no rpm after obd2 to obd1 swap
so i swapped a 2000 non vtec obd2 engine in my 94 non vtec obd1 integra, droped engine in with stock harness and everything using a p28 chipped ecu.. problem is everything works besides rpm guage, only thing i can think of is that i swaped the guage cluster from the stock one to a gsr one few weeks back, ill be swaping it back in 2maro, but just incase that doesnt work, anyone with any ideas, cause i puzzled, i have done this before in a 95 civic with a 99 obd2 engine, no issues, let me know what you guys thinks...
#2
Junior Member
Thread Starter
Join Date: Aug 2008
Location: calgary, alberta, canada
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: no rpm after obd2 to obd1 swap
well i swapped the guages, its still doesnt work so i guess switching the dizzy and wires over to obd1 is the next best, anyone can confirm this, as i said did this same swap in a 95 civic none of these issues.. thanks
Thread
Thread Starter
Forum
Replies
Last Post