My project update
#1
Honda-Tech Member
Thread Starter
My project update
Im removing everything i said as to new developments with the wiring, i apoligize for posting this and wasting bandwith
I know its a honda board and i own a 240, but many people asked about my swap over the last few months from my last update
just know i have my wiring back and will try to get it running as soon as i get down to tucson.
sorry again.
Modified by Kamin at 10:07 PM 12/7/2003
I know its a honda board and i own a 240, but many people asked about my swap over the last few months from my last update
just know i have my wiring back and will try to get it running as soon as i get down to tucson.
sorry again.
Modified by Kamin at 10:07 PM 12/7/2003
#2
I'm gonna retain all this info as I plan on getting a 97-98 240.. and gettin an rb25 just like you! [not wanting to be you I've wanted this for a while too] good luck! sucks that they didn't come through man hope you get your stuff goin keep us postde!
#3
Honda-Tech Member
Thread Starter
Re: (.jefs0ng)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .jefs0ng »</TD></TR><TR><TD CLASS="quote">I'm gonna retain all this info as I plan on getting a 97-98 240.. and gettin an rb25 just like you! [not wanting to be you I've wanted this for a while too] good luck! sucks that they didn't come through man hope you get your stuff goin keep us postde!</TD></TR></TABLE>
everything i said it true, but from some new developments about my wiring harness that a friend told me it MAY actually work in the condition its in. all the **** i went through still stands but it may be a working harness.
i wont know for a while, so you can keep that short book i wrote about STM but just know the wiring MAY work so they could have done something right.
oh and FYI if you do get a 97-98 there is no way to keep it emissions legal with ANY swap. there are no OBDII skyline or sr20 motors.
everything i said it true, but from some new developments about my wiring harness that a friend told me it MAY actually work in the condition its in. all the **** i went through still stands but it may be a working harness.
i wont know for a while, so you can keep that short book i wrote about STM but just know the wiring MAY work so they could have done something right.
oh and FYI if you do get a 97-98 there is no way to keep it emissions legal with ANY swap. there are no OBDII skyline or sr20 motors.
#4
Re: (Kamin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kamin »</TD></TR><TR><TD CLASS="quote">
everything i said it true, but from some new developments about my wiring harness that a friend told me it MAY actually work in the condition its in. all the **** i went through still stands but it may be a working harness.
i wont know for a while, so you can keep that short book i wrote about STM but just know the wiring MAY work so they could have done something right.
oh and FYI if you do get a 97-98 there is no way to keep it emissions legal with ANY swap. there are no OBDII skyline or sr20 motors.</TD></TR></TABLE>
that's okay.. an old korean guy + 150 bucks says my car becomes legal..
everything i said it true, but from some new developments about my wiring harness that a friend told me it MAY actually work in the condition its in. all the **** i went through still stands but it may be a working harness.
i wont know for a while, so you can keep that short book i wrote about STM but just know the wiring MAY work so they could have done something right.
oh and FYI if you do get a 97-98 there is no way to keep it emissions legal with ANY swap. there are no OBDII skyline or sr20 motors.</TD></TR></TABLE>
that's okay.. an old korean guy + 150 bucks says my car becomes legal..
#6
hahha yeah.. damn.. can I ask how much the rb+extras needed to make it run cost you? I don't see why people get s14 motors for ~2600 bucks when the rb ranges between 3000 and 3500 right? can you shed some light as to why this is so much "better" for little increase in price? I just want an rb cause it's 2.5 and I can claim to have a skyline motor haha
or is it just because the gt-s engine doesnt have the "market" in the us like the sR?
or is it just because the gt-s engine doesnt have the "market" in the us like the sR?
#7
Honda-Tech Member
Thread Starter
Re: (.jefs0ng)
well depending on what route you go you are looking at
RB clip + driveshaft (200) + downpipe (50-100) + wiring (400) + misc swap **** (100)
if you get mckinney mounts and their own driveshaft thats another 1100$, buy you know its top quality.
so you can spend anywhere from 3500-5000 easily. all depends on what you want to do
and the RB isnt very popular for 3 main reasons
1) still MANY misconceptions about how hard it is to do
2) parts availability
3) rarity of clips. some people have waited weeks and months for a good clip to appear.
RB clip + driveshaft (200) + downpipe (50-100) + wiring (400) + misc swap **** (100)
if you get mckinney mounts and their own driveshaft thats another 1100$, buy you know its top quality.
so you can spend anywhere from 3500-5000 easily. all depends on what you want to do
and the RB isnt very popular for 3 main reasons
1) still MANY misconceptions about how hard it is to do
2) parts availability
3) rarity of clips. some people have waited weeks and months for a good clip to appear.
Trending Topics
#8
Re: (Kamin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kamin »</TD></TR><TR><TD CLASS="quote">
1) still MANY misconceptions about how hard it is to do
2) parts availability
3) rarity of clips. some people have waited weeks and months for a good clip to appear.</TD></TR></TABLE>
1. not for me! ha!
2. yeah I see that but who needs to "mod" it right away when you have a skyline motor! I, too, am a broke child looking for a job..
3. I'm willing to wait as I always make plans according to failure [delays, etc] so I guess there's nothign wrong with me wanting an rb.. hope you get your stuff done..a nd yeah I'd estimate the 5000 and not a 3500 cause I don't wanna take any risk as my knowledge isn't very "full" so I'd just get mckinny instead of trying to go other routes.. hehe.
1) still MANY misconceptions about how hard it is to do
2) parts availability
3) rarity of clips. some people have waited weeks and months for a good clip to appear.</TD></TR></TABLE>
1. not for me! ha!
2. yeah I see that but who needs to "mod" it right away when you have a skyline motor! I, too, am a broke child looking for a job..
3. I'm willing to wait as I always make plans according to failure [delays, etc] so I guess there's nothign wrong with me wanting an rb.. hope you get your stuff done..a nd yeah I'd estimate the 5000 and not a 3500 cause I don't wanna take any risk as my knowledge isn't very "full" so I'd just get mckinny instead of trying to go other routes.. hehe.
Thread
Thread Starter
Forum
Replies
Last Post
DpSyChO
Honda CRX / EF Civic (1988 - 1991)
4
09-06-2005 07:23 AM
PHiZ
Acura RSX DC5 & Honda Civic EP3
4
06-01-2004 09:32 PM