my car is trowing a code I need help!!!
#1
Thread Starter
Join Date: Nov 2002
Location: ca, usa
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
my car is trowing a code I need help!!!
I have a 93 civic with a b16a I just had a new crower valvetrain by IB and Jeff made me two different chips for my hondata one for n/a and the other for the nos. He put the car on the dyno with the n/a chip and it went fine and then he opend up the bottle with the same chip and everything was fine but when he swaped out the chip for the nos chip it started trowing code 8.
so I checked what code eight was and it's the tdc sensor and I ran a test to see if it was working properly and it works fine, I already unpluged the ecu and swaped in a new one but the code is still there I ran out of ideas can anyone help me
I'm sorry if it's kindda hard to understand what i'm trying to say
I already tried swapin in the first chip but still the same problem
[Modified by bluedemon, 10:18 PM 2/2/2003]
so I checked what code eight was and it's the tdc sensor and I ran a test to see if it was working properly and it works fine, I already unpluged the ecu and swaped in a new one but the code is still there I ran out of ideas can anyone help me
I'm sorry if it's kindda hard to understand what i'm trying to say
I already tried swapin in the first chip but still the same problem
[Modified by bluedemon, 10:18 PM 2/2/2003]
Thread
Thread Starter
Forum
Replies
Last Post