Machine Shops in Dallas area?
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: Garland, TX, USA
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Machine Shops in Dallas area?
i need to kno if anyone knows of any machine shops in Dallas (preferably closer to Garland).. and if uve been there wat was ur experience?
i need this to get my LS block bored, honed, and fit the CTR pistons.. and also have the CTR piston pins pressed to my eagle rods..
also does anyone think i should get anything else done at the machine shop besides those above?.. im also gonna ask them if they can get the numbers and letters from the block and crank so i kno which rod bearings (color) to get
thanks any info will be appreciated
(This is for my ls/vtec)
[Modified by xFlipNotiKx, 7:35 PM 5/10/2002]
i need this to get my LS block bored, honed, and fit the CTR pistons.. and also have the CTR piston pins pressed to my eagle rods..
also does anyone think i should get anything else done at the machine shop besides those above?.. im also gonna ask them if they can get the numbers and letters from the block and crank so i kno which rod bearings (color) to get
thanks any info will be appreciated
(This is for my ls/vtec)
[Modified by xFlipNotiKx, 7:35 PM 5/10/2002]
Thread
Thread Starter
Forum
Replies
Last Post
detroitdiscounts2000
All Motor / Naturally Aspirated
3
10-13-2006 10:00 AM