Machine Shop for LS/Vtec build and assembly
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Stuck in my Charge Pipe
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Machine Shop for LS/Vtec build and assembly
I'm building an LS/VTEC motor using pretty much all Full-Race parts along with CP pistons and Im trying to find someone to do the machine work and assmbly. I need to have the block cleaned, magnafluxed, hot tanked ect. along with the bore/sleeve(84mm), hone, and the crank micropolished, balanced blueprinted ect..
The guys at Full-Race recommended RS Motorsports? in cali but I cant find thier number anywhere and goggle was no help :angry:
So needless to say Im trying to get all this stuff done bya good shop because I want to avoid the horror stories that I've heard about LS/Vtec's.
Thanks for any info you can give
The guys at Full-Race recommended RS Motorsports? in cali but I cant find thier number anywhere and goggle was no help :angry:
So needless to say Im trying to get all this stuff done bya good shop because I want to avoid the horror stories that I've heard about LS/Vtec's.
Thanks for any info you can give
#4
Re: Machine Shop for LS/Vtec build and assembly (Jcr1982)
Where do you live? There are lots of good machine shops, you just gotta find one near where you are....unless you want to ship.
#5
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Stuck in my Charge Pipe
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Re: Machine Shop for LS/Vtec build and assembly (Scott - 93HB Si)
I live in savannah Ga. know any good shops in Ga SC or northern Fla?
Thread
Thread Starter
Forum
Replies
Last Post
blkb18
All Motor / Naturally Aspirated
1
09-09-2006 08:12 AM
1hotintegra
Hybrid / Engine Swaps
15
10-09-2002 02:16 PM