Just got the new swap to the track
#1
Thread Starter
Join Date: Jan 2002
Location: Kennewick, wa, usa
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
Just got the new swap to the track
Alright I just got my car to the track yesterday and let me say there was no way in hell I could hookup. I am running nitto 555R drag radials and I would spin in 1st and 2nd . Anyway I ended up running a 14.1 at 97 with a 2.4 60 ft. My setup is a 00 civic with gsr motor
#2
Honda-Tech Member
Re: Just got the new swap to the track (tSuperbike69)
a 14.1???
oh your squeezing
take some tire pressure out of the front. i run about 20.
you NEED to get that 60' down to about 2.2 then youll be in the 13's
make sure you have a helmet or theyll kick you out.
oh your squeezing
take some tire pressure out of the front. i run about 20.
you NEED to get that 60' down to about 2.2 then youll be in the 13's
make sure you have a helmet or theyll kick you out.
#3
Thread Starter
Join Date: Jan 2002
Location: Kennewick, wa, usa
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got the new swap to the track (KAMiN)
I was running 17 lbs with no wheel hop but just wheel spin. I kinow I need to get the 60 ft. down. I will just need to get used to the new motor
Thread
Thread Starter
Forum
Replies
Last Post
slooogsr
Forced Induction
12
05-22-2007 08:10 AM
westcoaststyle
Honda Civic / Del Sol (1992 - 2000)
36
11-16-2003 09:34 AM
95c1v1cs1
Drag Racing
18
06-09-2003 04:11 PM