Miguel613ekb18c

Ok so the swap is 96 spec jdm b18c type r in my 99 ek, the car runs good pulls really hard but there is a constant check engine light, I've tried to manually pull the code but engine light does not flash when I jump the service connector

My wire harness is obd2b
Obd2b to obd2a jumper harness
Obd2a p73-013 jdm ecu
Idles at 1100 rpm which doesn't really bother me

At first start up there is no check engine light, then after 10 seconds the check engine light come on and stays on which is really bothering me, is this normall for having a jdm ecu?

HondaPartsHero

Pull the codes and report back.

TurboEM1

iTrader: (1)

yea im curious what the codes are. get an obd2 reader and post.