Intermediate shaft measurements please!
#2
Honda-Tech Member
Join Date: Mar 2001
Location: Houston, TEXAS, USA
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Re: Intermediate shaft measurements please! (Sac)
Which intermediate shaft - manual or automatic? And what specific measurements are you looking for - spline count, length, bracket dimensions, etc...? I have one sitting in the garage I can measure for you, just let me know.
#6
Honda-Tech Member
Join Date: Mar 2001
Location: Houston, TEXAS, USA
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Re: Intermediate shaft measurements please! (Sac)
Check out the last photo here
Here's the measurement's:
A, Total length (from metal rim housing the seal to the other end with splines) - 15.75"
B, Length from metal rim housing the seal to cap that mount with tranny seal - 12.75"
C, Spline length - 1.00"
D, Length from shoulder that goes into the tranny to spline shaft end ~ 2.44"
Let me know if there is anything else.
Here's the measurement's:
A, Total length (from metal rim housing the seal to the other end with splines) - 15.75"
B, Length from metal rim housing the seal to cap that mount with tranny seal - 12.75"
C, Spline length - 1.00"
D, Length from shoulder that goes into the tranny to spline shaft end ~ 2.44"
Let me know if there is anything else.
#7
Thread Starter
Join Date: Apr 2003
Location: J C, Tennessee, USA
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
Re: Intermediate shaft measurements please! (Vracer111)
Awesome man! Mine was 14" from the metal rim housing to the tranny seal! Thanks alot . Fixed my problem.
Thread
Thread Starter
Forum
Replies
Last Post
looxs
Northern California (Sales)
4
03-05-2006 08:56 PM
Kusai.Nihonjin.Desu
Honda Civic / Del Sol (1992 - 2000)
7
10-27-2003 09:54 PM