I need help on build.
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lufkin, Texas, Angelina
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
I need help on build.
Ok I want to build for turbo but right now i dont have the money for it so im wanting to go jus n/a with atleast 200+ hp, but in the future im wanting to boost it so i need help picking parts.
Alright I have a bare Gsr head thats been PNP, and some crower valves springs and retainers, need help choosing some valves. Also i want some mid range piston like pr3 or p30s but I dont know if thats a good idea for boost later on.. someone help me decide and choose thank
Ohh i have 2 different blocks in mind on building, I have a b20b4 block right now in my car and im leaning more towards getting a gsr bottom end but lets hear some inputs
Alright I have a bare Gsr head thats been PNP, and some crower valves springs and retainers, need help choosing some valves. Also i want some mid range piston like pr3 or p30s but I dont know if thats a good idea for boost later on.. someone help me decide and choose thank
Ohh i have 2 different blocks in mind on building, I have a b20b4 block right now in my car and im leaning more towards getting a gsr bottom end but lets hear some inputs
#5
Honda-Tech Member
Join Date: Oct 2009
Location: madison, Al
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need help on build.
I have a b20b4 block aswell, if it was me I'd throw that gsr head on and then build your gsr block while your working out the kinks on the b20 bottom end. The b20 bottom end is hella cheaper than the gsr. just my two cents
Thread
Thread Starter
Forum
Replies
Last Post