HondaMotorsonline problem....
#1
HondaMotorsonline problem....
well i got my swap about 3-4 monthes ago...
it was clean and complete...
it was a 97 JDM GSR complete swap...
its installed just recently...
and i realize that i have a Hydro b16 tranny... not to mention
that it grinds in 2,3,4 gears...i changed the tranny fluid, and bled the clutch
i did everything i could...
it also had a dented to hell oil pan...
im just a little upset that i didnt "get" what i "ordered"
which should be a GSR tranny... i cant rebuild this b16 tranny
cuz of the JDM gears arent the same as US gear sets...
i dont know what to do.. do i have a right to complain?? i feel like i should be compensated in some way...
i WANT a Non Dented oil pan... but i dont know what to do about the tranny.
he still hasnt returned my phone call..
it was clean and complete...
it was a 97 JDM GSR complete swap...
its installed just recently...
and i realize that i have a Hydro b16 tranny... not to mention
that it grinds in 2,3,4 gears...i changed the tranny fluid, and bled the clutch
i did everything i could...
it also had a dented to hell oil pan...
im just a little upset that i didnt "get" what i "ordered"
which should be a GSR tranny... i cant rebuild this b16 tranny
cuz of the JDM gears arent the same as US gear sets...
i dont know what to do.. do i have a right to complain?? i feel like i should be compensated in some way...
i WANT a Non Dented oil pan... but i dont know what to do about the tranny.
he still hasnt returned my phone call..
#2
Honda-Tech Member
Re: HondaMotorsonline problem.... (VTECxSiR)
dude
pound out the oil pan
dont bitch about it being dented
when you sit a 400lb engine on a piece of aluminum and put it on a truck its gonna get dented
it takes an hour to take it off and pound it out.
and for the transmission, dont know what to tell you.
pound out the oil pan
dont bitch about it being dented
when you sit a 400lb engine on a piece of aluminum and put it on a truck its gonna get dented
it takes an hour to take it off and pound it out.
and for the transmission, dont know what to tell you.
#4
Re: HondaMotorsonline problem.... (VTECxSiR)
there's know way of telling from the outside that gears are stripped or anything. Maybe you throw out bearing isn't aligned or working right, maybe the shift linkage, maybe how you shift, no telling.
#5
Re: HondaMotorsonline problem.... (VTECxSiR)
it also had a dented to hell oil pan...
im just a little upset that i didnt "get" what i "ordered"
which should be a GSR tranny... i cant rebuild this b16 tranny
cuz of the JDM gears arent the same as US gear sets...
i dont know what to do.. do i have a right to complain?? i feel like i should be compensated in some way...
i WANT a Non Dented oil pan... but i dont know what to do about the tranny.
he still hasnt returned my phone call..
#6
Join Date: Jun 2002
Location: san fernando valley, ca, u.s.a
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: HondaMotorsonline problem.... (Rspool)
Steve knows when hes wrong hes wrong an has proven it many times.Dont hold back,nicely call him an explain in nice tone of voice the problem an I can totally see him remeding the problem.The oil pan is only cause of the motor resting on it for any period of time.Also gettin the wrong tranny could possible not be his fault since a motor an tranny usualy come pieced toghether when he buys it.Maybe the crashed car he pulled the swap outa had that tranny on it an he never realized it figuring it should have technically came with a gsr tranny right out the factory.If he pulled the swap outa a wrecked car which is where most come from he has no idea if the tranny was ever replaced.Steve doesnt answer every call because every call is fowared to his cell phone an even I who live 10min from his shop can only get threw to him after maybe 3 phone calls.Trust me steve wil help you out as long as you keep your cool an explain the problem nicely.GOOD LUCK.
#7
Honda-Tech Member
Join Date: Aug 2001
Location: The Emerald City, USA
Posts: 3,025
Received 0 Likes
on
0 Posts
Re: HondaMotorsonline problem.... (drunken jdm monkey)
Please respond A.S.A.P. when you know whats gonna happen. I want to buy my motor from them next month. Hope all goes well.
Trending Topics
#9
Member
Join Date: Feb 2002
Location: Bears Cubs Bulls.. they all suck
Posts: 2,718
Likes: 0
Received 0 Likes
on
0 Posts
Re: HondaMotorsonline problem.... (VTECxSiR)
Sucks that the tranny is fucked, but if I were to choose a tranny, it'd be the B16 anyways... Good luck on sorting things out...
#11
Honda-Tech Member
Re: HondaMotorsonline problem.... (VTECxSiR)
steve is the man....
i talked to him.. and he has excellent Customer service.!
HMO
i talked to him.. and he has excellent Customer service.!
HMO
we could have told u that
steve is the man.
#12
Honda-Tech Member
Join Date: Nov 2001
Location: Tucson, AZ, USA
Posts: 3,396
Likes: 0
Received 0 Likes
on
0 Posts
Re: HondaMotorsonline problem.... (KAMiN)
steve is the man....
i talked to him.. and he has excellent Customer service.!
HMO
duh
we could have told u that
steve is the man.
i talked to him.. and he has excellent Customer service.!
HMO
duh
we could have told u that
steve is the man.
Thread
Thread Starter
Forum
Replies
Last Post