Honda Logo VTEC Swap mini-me, some problems
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Honda Logo VTEC Swap mini-me, some problems
Hi! i removed from EG5 Civic D16Y8 block with D16Z6 head. Ok, installed into Honda Logo 99 , Stock come with D13B7 engine. everything was good, just we have a coupe problems, get cel 14 IACV, what i dont understand is why this cel because in the EG5 everything was good not cel.
Other problem is when i just rev it up the engine, let say about 5-15% tps , engine fails.. i made some videos..any input?
Rev. problems..
14 CEL
I assume i have to try other iacv..this cel could cause rev engine problem? Checked TPS and is working good.
Thanks!
Other problem is when i just rev it up the engine, let say about 5-15% tps , engine fails.. i made some videos..any input?
Rev. problems..
14 CEL
I assume i have to try other iacv..this cel could cause rev engine problem? Checked TPS and is working good.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post