Honda Hybrid Hybrid???
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: kinnelon, nj, us
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Honda Hybrid Hybrid???
Has anyone ever heard of a swapped honda insight? I think this could be the coolest honda swap ever... it kinda looks like a new gen CRX but its SO slow
heres the stats on a stock insight at a glance:
Vehicle type front-wheel drive, 2-person, 3-door coupe
Fuel consumption (hwy/city) 70/61 mpg
Acceleration (0-60 mph) 11 sec
Transmission 5 speed manual
Body construction Aluminum alloy
Curb weight 1887 lbs.
Aerodynamic drag 0.25 cd
Price w/ AC $20,080 US
i plugged this curb weight into a quarter mile calc. and assuming 220hp(ls vtec?) to the crank: The quarter mile acceleration time of a car that weighs 1887 pounds and has 220 horsepower is 11.924 seconds. The speed is 114.336281399037 mph. a turbo ls vtec in one of these thigs would def be the ultimate sleeper. so has anyone heard of this being done or am i just stupid?
heres the stats on a stock insight at a glance:
Vehicle type front-wheel drive, 2-person, 3-door coupe
Fuel consumption (hwy/city) 70/61 mpg
Acceleration (0-60 mph) 11 sec
Transmission 5 speed manual
Body construction Aluminum alloy
Curb weight 1887 lbs.
Aerodynamic drag 0.25 cd
Price w/ AC $20,080 US
i plugged this curb weight into a quarter mile calc. and assuming 220hp(ls vtec?) to the crank: The quarter mile acceleration time of a car that weighs 1887 pounds and has 220 horsepower is 11.924 seconds. The speed is 114.336281399037 mph. a turbo ls vtec in one of these thigs would def be the ultimate sleeper. so has anyone heard of this being done or am i just stupid?
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: kinnelon, nj, us
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Hybrid Hybrid??? (BLUCIVICSl2)
i wish i had the time and money to do this id hav a guaranteed spot on the cover of honda tuning
#5
Re: Honda Hybrid Hybrid??? (BLUCIVICSl2)
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: kinnelon, nj, us
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gsrious)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsrious »</TD></TR><TR><TD CLASS="quote">umm, maybe you haven't been paying attention. :whoknows:
bisi has one as well as many others.
a k motor in that chasis would be the shiznit.</TD></TR></TABLE>
umm, paying attention to what? guess i didnt get the memo. way to post a link jacknife thanks
bisi has one as well as many others.
a k motor in that chasis would be the shiznit.</TD></TR></TABLE>
umm, paying attention to what? guess i didnt get the memo. way to post a link jacknife thanks
#9
MiG-21 superfan
Join Date: Mar 2001
Location: near the ocean, Moderator City, NJ
Posts: 8,628
Likes: 0
Received 3 Likes
on
3 Posts
Re: (BLUCIVICSl2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLUCIVICSl2 »</TD></TR><TR><TD CLASS="quote">
umm, paying attention to what? guess i didnt get the memo. way to post a link jacknife thanks</TD></TR></TABLE>
he's saying these guys have been actively racing their insights for a while now...bisi especially is pretty high profile. Norris is an *** but races with a pretty good sponsor list.
keep in mind that battery bank the insight uses weighs alot, so that curb weight you have might not be accurate (lighter) when you consider what it'd weigh without that. then again, i'm sure whatever swapped engine would end up weighing the same as the orig engine and battery bank combined.
i think the main problem would be finding one that you could use. it'd be very expensive for something that barely fits two people and probably isn't commonly around/available
Just get a CRX...atleast it'd be a good looking vehicle at that point.
umm, paying attention to what? guess i didnt get the memo. way to post a link jacknife thanks</TD></TR></TABLE>
he's saying these guys have been actively racing their insights for a while now...bisi especially is pretty high profile. Norris is an *** but races with a pretty good sponsor list.
keep in mind that battery bank the insight uses weighs alot, so that curb weight you have might not be accurate (lighter) when you consider what it'd weigh without that. then again, i'm sure whatever swapped engine would end up weighing the same as the orig engine and battery bank combined.
i think the main problem would be finding one that you could use. it'd be very expensive for something that barely fits two people and probably isn't commonly around/available
Just get a CRX...atleast it'd be a good looking vehicle at that point.
#10
Re: (builthatch)
there was an insight a long time ago that had a turbo'd gsr motor in it... i dont remember where i saw it.. but if im correct, it was set up for salt flats out in utah i think... or osmething like that... top speed trials, close to like 200mph..
#12
Re: (builthatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by builthatch »</TD></TR><TR><TD CLASS="quote">http://www.insightman.com/fastest/
a friend's shop did the work on the car in queens...</TD></TR></TABLE>
thats the one i was thinking of. cool!!!!
a friend's shop did the work on the car in queens...</TD></TR></TABLE>
thats the one i was thinking of. cool!!!!
#14
Honda-Tech Member
Join Date: Sep 2001
Location: Denver, Colorado
Posts: 1,770
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Hybrid Hybrid??? (BLUCIVICSl2)
Problem with the insight is the body shell is really frail. The car was no way inteded to have even a heavy motor in it. It's mostly aluminum and is in no way close to the rigitity of an NSX.
#15
Honda-Tech Member
Join Date: Jan 2004
Location: Tampa, FL
Posts: 1,251
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Hybrid Hybrid??? (Quik Chris)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quik Chris »</TD></TR><TR><TD CLASS="quote">It's mostly aluminum and is in no way close to the rigidity of an NSX. </TD></TR></TABLE>
wtf lol
no ****.
wtf lol
no ****.
#16
MiG-21 superfan
Join Date: Mar 2001
Location: near the ocean, Moderator City, NJ
Posts: 8,628
Likes: 0
Received 3 Likes
on
3 Posts
Re: Honda Hybrid Hybrid??? (spectacle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spectacle »</TD></TR><TR><TD CLASS="quote">
wtf lol
no ****.</TD></TR></TABLE>
well, i'm sure he qualified it by making the NSX comment because if he solely said it was made mostly of Al, someone in typical h-t fashion would say 'but the NSX is mostly aluminum'
wtf lol
no ****.</TD></TR></TABLE>
well, i'm sure he qualified it by making the NSX comment because if he solely said it was made mostly of Al, someone in typical h-t fashion would say 'but the NSX is mostly aluminum'
#18
Re: Honda Hybrid Hybrid??? (Quik Chris)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quik Chris »</TD></TR><TR><TD CLASS="quote">Problem with the insight is the body shell is really frail. The car was no way inteded to have even a heavy motor in it. It's mostly aluminum and is in no way close to the rigitity of an NSX. </TD></TR></TABLE>
hahah.. funny as that sounds, most of us know that it is true...
thats why they all have roll cages in them.
hahah.. funny as that sounds, most of us know that it is true...
thats why they all have roll cages in them.
Thread
Thread Starter
Forum
Replies
Last Post
Kryptonite
Honda / Acura
13
12-02-2002 10:29 AM