zeejermons

i am in need of an h22a7 year 2000 wiring diagram. All anyone has is the 92-96 h22 wiring diagrams. I am using an LS integra 1994 harness to wire it up, and i need to figure out three things. I've got a 3 wire IACV and the ls harness only has a plug for a 2 wire one. There is a plug in the cylinder wall under the IM but above the oil filter, it's not the knock senso, because that is below the oil filter, this is a plug that goes right into the block, and i don't know what it is, there is no plug for it from the LS harness and there is no name for the plug in the 92-96 prelude diagrams. Last but not least, there is a 4 wire plug that goes straight down along the timing belt side and goes into the block through the bottom corner, and i definitely did not have this on my LS block, so i don't know what that's all about either. can anyone offer some help plz? thanks.

v4lu3s

the 4 wire plug by the oil pump is your crank angle and TDC sensors.

and for the iacv...which ecu are you using?

zeejermons

well i just swapped to an OBDI distributor.. so i guess that TDC sensor doesn't matter anymore does it? umm i'm using a P13 ecu.