H22 Confusion!!!
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Seattle, WA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
H22 Confusion!!!
hey guys im new here and new to the whole engine swap bonanza. i've been reading all the things i can about H22's in EG hatches, well i have a DX hatch92 and since i dont know crap about wiring im going to send it to Hasport and get that all done or Rywire (same stuff its like 50bucks cheaper, dun know if the qualitiy is the same). Some of my many questions are:
1) since my car didnt have vtec. do i need solinoid set up or do they usually come on the engines?
2)that intermediate shaft.. is that Required? and does it usually come with the engine?
3)are Innovative mounts decent? i looked at them the price seems good
Id appreciate any feedback as to how this is done with ease, i know a lot of the people on the forums have done this swap and id jus like some help on the little things that i may not know.... which at this point are a lot... appreciate the help. thx
1) since my car didnt have vtec. do i need solinoid set up or do they usually come on the engines?
2)that intermediate shaft.. is that Required? and does it usually come with the engine?
3)are Innovative mounts decent? i looked at them the price seems good
Id appreciate any feedback as to how this is done with ease, i know a lot of the people on the forums have done this swap and id jus like some help on the little things that i may not know.... which at this point are a lot... appreciate the help. thx
#3
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Seattle, WA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Confusion!!!
yea, dunno where to begin really i think i've just been reading random **** and jus confusing myself. I've been collecting things for the swap.. mounts.. and so on, any help would be appreciated.
#4
Re: H22 Confusion!!!
hey guys im new here and new to the whole engine swap bonanza. i've been reading all the things i can about H22's in EG hatches, well i have a DX hatch92 and since i dont know crap about wiring im going to send it to Hasport and get that all done or Rywire (same stuff its like 50bucks cheaper, dun know if the qualitiy is the same). Some of my many questions are:
1) since my car didnt have vtec. do i need solinoid set up or do they usually come on the engines?
2)that intermediate shaft.. is that Required? and does it usually come with the engine?
3)are Innovative mounts decent? i looked at them the price seems good
Id appreciate any feedback as to how this is done with ease, i know a lot of the people on the forums have done this swap and id jus like some help on the little things that i may not know.... which at this point are a lot... appreciate the help. thx
1) since my car didnt have vtec. do i need solinoid set up or do they usually come on the engines?
2)that intermediate shaft.. is that Required? and does it usually come with the engine?
3)are Innovative mounts decent? i looked at them the price seems good
Id appreciate any feedback as to how this is done with ease, i know a lot of the people on the forums have done this swap and id jus like some help on the little things that i may not know.... which at this point are a lot... appreciate the help. thx
1. yes if u buy a vtec engine, it should come on there, but u have to make sure.
2. yes, sometimes. research and know what u are buying.
3. yes.
u need to read the sticky threads at top of this section. if u have, then read them again and again...
#5
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Seattle, WA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Confusion!!!
yea, i appreciate the help, im not so mechanically encline so this is all new to me. TY for the posititive reply, and yes i ordered the innovative mounts went and got shifter and linkage and am ordering the axles soon.
#6
#7
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Seattle, WA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Confusion!!!
ty for the links, i've read some of these already but i think i jus need to relax about the whole thing and read these over and over i guess till it sinks in. thanks for the help LA HONDAS.
Trending Topics
#8
Re: H22 Confusion!!!
i really hope that the axles they used, from the first link, works!! i've been trying all different kinds and i'm about to give up and buy custom ones!!
Thread
Thread Starter
Forum
Replies
Last Post