GSR eg swap hood problem
03-08-2016, 06:16 PM
#1
GSR eg swap hood problem
Hello,
I've seem to run across a problem installing my GSR trans and engine in my 1994 honda civic cx. I ordered all the mounts, linkage, axles etc. and everything lines up and was installed correcting (no jiggyrigging). When the engine was first put in the mounts aligned properly but when I took a step back, the engine was wayyyy above the hood line. What did I do wrong? PLEASE HELP!!!
Thanks in advance,
Pete
I've seem to run across a problem installing my GSR trans and engine in my 1994 honda civic cx. I ordered all the mounts, linkage, axles etc. and everything lines up and was installed correcting (no jiggyrigging). When the engine was first put in the mounts aligned properly but when I took a step back, the engine was wayyyy above the hood line. What did I do wrong? PLEASE HELP!!!
Thanks in advance,
Pete
03-08-2016, 09:34 PM
#2
Re: GSR eg swap hood problem
This thread/post is about engine swap woes. This has nothing to do with engine machining or engine assembly.
Moved to a semi more appropriate place. The engine swap section.
Mods here might feel another section is more appropriate.
Moved to a semi more appropriate place. The engine swap section.
Mods here might feel another section is more appropriate.
03-09-2016, 09:39 AM
#3
Re: GSR eg swap hood problem
Just looking for feedback. I figured this might have something to do with engine assembly considering it fits in everyone else's, but not mine.
Thread
Thread Starter
Forum
Replies
Last Post
CHAMPION68
Honda Minivans, Crossovers, and Trucks
0
12-28-2017 06:18 AM
eunsangie
Honda Civic / Del Sol (1992 - 2000)
2
04-16-2007 07:32 PM