A few questions now that my swap is complete
01-02-2003, 11:15 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: East Coast Destruction
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
A few questions now that my swap is complete
Heres the deal. I had a 2000 si and i flipped it. I bought a 96 4-door ex and put the motor in there. I did a obd-1 conversion with a chipped p28. I have seen no CEL but my crank angle sensor was ripped off when i wrecked my car. I need to find out if my car is running in safe mode on that ECU? i dont even know if thats possible? My car is SOOOOO Slow! HELP! Also when wiring in my VAFC what do i wire it in to? The conversion harness or the stock harness? Thank yoU!
Thread
Thread Starter
Forum
Replies
Last Post
phiberoptik
Engine Management and Tuning
1
07-11-2010 08:56 PM
specv5150
Classifieds: Forced Induction
3
06-19-2005 10:07 AM