ECT question, searched, not what I need.
06-24-2006, 08:32 AM
#1
Thread Starter
Join Date: Jun 2005
Location: Shreveport, LA, USA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
ECT question, searched, not what I need.
I have a 2000 Accord SE with a 95 JDM H22A. My mechanic never got the temp gauge on my cluster to work, whenever he would run it up needle would peg out after a couple minutes of running.
I installed my Hondata S300 last week and noticed that when the ambient tempature before engine start first thing in the morning is about 70 F the ECT reads around 130F. after about 3-5 minutes of the engine running the ECT reads 270-280F. Can someone point me in the right direction?
Do I need to replace the sensor, install a resistor, check the sending unit or what?
Another thing I've noticed is my radiator fans will turn on at any tempature above 40 F ambient air temp.
I installed my Hondata S300 last week and noticed that when the ambient tempature before engine start first thing in the morning is about 70 F the ECT reads around 130F. after about 3-5 minutes of the engine running the ECT reads 270-280F. Can someone point me in the right direction?
Do I need to replace the sensor, install a resistor, check the sending unit or what?
Another thing I've noticed is my radiator fans will turn on at any tempature above 40 F ambient air temp.
06-25-2006, 05:36 PM
#2
Thread Starter
Join Date: Jun 2005
Location: Shreveport, LA, USA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Re: ECT question, searched, not what I need. (Accord2k-Hybrid)
I always seem to have the tough questions that nobody has a clue about. So I guess I'll have to figure this one out on my own as well. 
Thread
Thread Starter
Forum
Replies
Last Post
oo_phuong
Honda Accord (1990 - 2002)
10
03-13-2008 07:42 AM