building my own motor
#1
Thread Starter
Join Date: Sep 2002
Location: San Francisco, CA, USA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
building my own motor
i decided to learn to build an engine on my own. since i dont have enough money to buy a complete swap all at once, i m looking forward to buy just the head or the block first, then try to build it up. i know by doing this will take much longer time and even more expensive. but i will definitely learn something from it and will enjoy it. please tell/teach me how to start first. what are the parts that i need in order to build it up?
i've been looking into the classified session and found some deals on the head and the blocks. but i really dont know how to choose them.
i have in mind that either b16a2 and b18(gsr) parts are good for me to start with.
will appriciate ur advises.
i've been looking into the classified session and found some deals on the head and the blocks. but i really dont know how to choose them.
i have in mind that either b16a2 and b18(gsr) parts are good for me to start with.
will appriciate ur advises.
#2
Honda-Tech Member
Re: building my own motor (S)
1) buy a helms. http://www.helminc.com
2) read honda-tech no offense, but you dont sound ready to build a motor.
2) read honda-tech no offense, but you dont sound ready to build a motor.
Thread
Thread Starter
Forum
Replies
Last Post
Irishweird00
Honda Civic / Del Sol (1992 - 2000)
21
01-20-2003 02:33 PM