Miracle_X_Bar

b20 bottom end with a b16 head,,,, which arp studs would you use??? b18a or gsr, or b16....i want to know!

tiiiite

Dan GSR

I just recently built a b20/vtec ....used gsr arp head studs....workd great....

and i was told they are the ones to use

they do have ones specific for ls/vtec b20/vtec but they didn't have in stock....but gsr is basically the same

nominous

I recently built one and used the B16 bolts that came out of the B16 when I split the block from hte head. Works fine, as suggested by a couple of people who have been running this way for quite a few months.

h22 ef

do not use b16 head bolts on anything but a b16, its not worth the risk of stripping the threads out of the block

b20_ed

ok, lets start by https://honda-tech.com/zerosearch

Jeff C

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dan GSR &raquo;</TD></TR><TR><TD CLASS="quote"> b20/vtec ....used gsr arp head studs....workd great....</TD></TR></TABLE>

Full Race EG

GSR

JdmegFOUR

1.8 l gsr will do