i just dropped a b18b into a civic hatch the only thing that i have left is the spot for the vaccum hose on top of the throttle body. Where does that go????

also which CAI can i use for a 92-95 hb with the b18b

 

Not sure which hose you are talking about. The only vacuum hose on my TB is for the firewall mounted MAP. I am using a first gen B16 TB though. You can use any intake for the 92-95 hatch. I have also heard the intake for a 99+ Si and 96+ EX intake will fit with no problem. Look for whatever is cheapest.

 

Without a pic it's hard to say. I would bet it goes to the charcoal canister though.

 

I used my Civic CAI with my B18, I had to make a different bracket though.

 

now that you mention it there is one empty spot on the canister for a line.

so a intake from a 92-95 hatch si will fit???

 

possibly its off a charcoal canister if its the larger then normal size. (red braided hose should go on)

 

The hose from the TB goes to the charcoal canister. You can use a 99-00 SI CAI with the LS swap...

 

thanks that answers al my questions for now