b16A1 vs. b16A2
#1
Thread Starter
Join Date: Sep 2002
Location: San Francisco, CA, USA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
b16A1 vs. b16A2
why must i put a b16a2 in my 2000 ex? why can i choose the cheaper b16A1? i know that the computers are different and they use different cables. but what else is different?
#2
Honda-Tech Member
Re: b16A1 vs. b16A2 (S)
dont be a cheap ***.
cams are weaker, clutch is cable driven ecu is OBD0 etc etc
its not worth it, it will cost you as much to put a first gen b16 in.
and the motor is over 10 years old.
cams are weaker, clutch is cable driven ecu is OBD0 etc etc
its not worth it, it will cost you as much to put a first gen b16 in.
and the motor is over 10 years old.
#3
New User
Re: b16A1 vs. b16A2 (KAMiN)
You'll spend getting random parts to work with an old b16 cable (ewwww) then a newer b16.
JDM spec is much improved vs. USDM BTW.
Will bolt right up as PnP. Few modifications, such as shift linkage.
JDM spec is much improved vs. USDM BTW.
Will bolt right up as PnP. Few modifications, such as shift linkage.
#5
Honda-Tech Member
Re: b16A1 vs. b16A2 (hondaatwsu)
look at his list of mods. and hes trying to b cheap mother ****** gettin a 1st gen B16a. just ban his *** now. dumbfuck.
not everybody comes out of the womb knowing everything
it was a legit question. he just didnt know what the diffrence was.
#6
B*a*n*n*e*d
Join Date: Jan 2002
Location: retired 2/13/10
Posts: 7,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2 (KAMiN)
that was kinda harsh dude
not everybody comes out of the womb knowing everything
it was a legit question. he just didnt know what the diffrence was.
not everybody comes out of the womb knowing everything
it was a legit question. he just didnt know what the diffrence was.
#7
Thread Starter
Join Date: Sep 2002
Location: San Francisco, CA, USA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2 (hondaatwsu)
"1300 is nothing"---to u maybe, but to me it is.
it's hard to make money now and i am just trying to minimize my spending. but since building up cars is my biggiest hobby so i am willing to spend a little more on it. but the main purpose of this post was that i wanted to know the difference between the 2 motors. please dont be harsh just becuz i am new to this forum. although u have more posts than i do, doenst mean that u know more than i do.
it's hard to make money now and i am just trying to minimize my spending. but since building up cars is my biggiest hobby so i am willing to spend a little more on it. but the main purpose of this post was that i wanted to know the difference between the 2 motors. please dont be harsh just becuz i am new to this forum. although u have more posts than i do, doenst mean that u know more than i do.
Trending Topics
#9
B*a*n*n*e*d
Join Date: Jan 2002
Location: retired 2/13/10
Posts: 7,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2 (S)
"1300 is nothing"---to u maybe, but to me it is.
it's hard to make money now and i am just trying to minimize my spending. but since building up cars is my biggiest hobby so i am willing to spend a little more on it. but the main purpose of this post was that i wanted to know the difference between the 2 motors. please dont be harsh just becuz i am new to this forum. although u have more posts than i do, doenst mean that u know more than i do.
it's hard to make money now and i am just trying to minimize my spending. but since building up cars is my biggiest hobby so i am willing to spend a little more on it. but the main purpose of this post was that i wanted to know the difference between the 2 motors. please dont be harsh just becuz i am new to this forum. although u have more posts than i do, doenst mean that u know more than i do.
2000civicEX5spd-
greddy turbo kit/evolution exhaust/profecB boost controller/hks bov
aem fuel pressure regulator/fuel rail
bbk inline fuel pump/random highflow cat/spearco intercooler/blitz turbo timer
tein ha coilover kit/neuspeed front strut bar/lower tie bar/civic si rear sway bar
buddy club p1 racing light weight 15"rims
sparco speed seat/autometer meters
theres ur list of mods on ur car yet i repeat, ur worried about 1300 difference in motors, come no now, get with the program. about 3k on turbo parts, over 2k in suspension ****, and a race seat w/ guages, my god, definitely a cheap ***, yeah right.
#10
Thread Starter
Join Date: Sep 2002
Location: San Francisco, CA, USA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2
in my post i asked,"why can i choose the cheaper b16a1?" i asked this question becuz i dint know they differ this much. since they have close hp output so i was wondering if the b16a1 is a pennysaver. but it turned out that they differ a lot and the b16a2 can actually save more in turns. so u see, i was trying to be cheap. i was trying to learn. please have respect!
#11
Thread Starter
Join Date: Sep 2002
Location: San Francisco, CA, USA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2 (hondaatwsu)
i have 98% was becuz i dint know the rules of the forum and i used the wrong words for the topic. but i will be aware of that in the future.
#12
Honda-Tech Member
Re: b16A1 vs. b16A2 (hondaatwsu)
that was kinda harsh dude
not everybody comes out of the womb knowing everything
it was a legit question. he just didnt know what the diffrence was.
and i repeat. look at his list of mods and tell me hes whining over a bill that will only b about 1300 bux difference from a A1 to an A2. come on now, knowledge has nothing to do with this. 1300 is nothing.
not everybody comes out of the womb knowing everything
it was a legit question. he just didnt know what the diffrence was.
and i repeat. look at his list of mods and tell me hes whining over a bill that will only b about 1300 bux difference from a A1 to an A2. come on now, knowledge has nothing to do with this. 1300 is nothing.
I was considering a first gen till i realized how much it was gonna cost to get running.
he is just learning cut him some slack.
#13
New User
Re: b16A1 vs. b16A2 (hondaatwsu)
why must i put a b16a2 in my 2000 ex? why can i choose the cheaper b16A1? i know that the computers are different and they use different cables. but what else is different?
#14
B*a*n*n*e*d
Join Date: Jan 2002
Location: retired 2/13/10
Posts: 7,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2 (w00t!)
hondaatwsu: No need to go crazy. I know since you go to wsu your most likey drunk right now.
#15
Honda-Tech Member
Join Date: Sep 2002
Location: Bloomington, MN, USA
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16A1 vs. b16A2 (hondaatwsu)
i really get sick of all the trash talking on these boards. i only have 20 or so posts... who cares. im learning, along with everyone else here. thats why we do these forums. we all know a little or alot and share our info to HELP eachother. just chill.
Thread
Thread Starter
Forum
Replies
Last Post
MMMm Waffles
Honda Civic / Del Sol (1992 - 2000)
7
06-18-2006 10:32 PM
nistule
Honda Civic / Del Sol (1992 - 2000)
14
06-01-2006 11:17 AM