B16A From Password JDM Just Got Here - 56k link at bottom
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: Hiboosta, IL, USA
Posts: 2,959
Likes: 0
Received 0 Likes
on
0 Posts
B16A From Password JDM Just Got Here - 56k link at bottom
I ordered a B16A1 from passwordjdm.com early February while they were sold out. It took a little time to get it but it was well worth it. Here's some pics, I had it delivered to my work and then just brought it home in my dad's truck.
All Wrapped Up In The Back Of The Truck
PR3 ECU
B16A With Short Geared S1 Trans
Axles and shift Linkage
Completly Uncut Wiring Harness
My DSM 450cc Injectors and BOV Came Today Too, Here Comes Boost
I thought JDM B16s Didn't Have The PGM-FI Plate?
More Thumbnailed Pics Here
All Wrapped Up In The Back Of The Truck
PR3 ECU
B16A With Short Geared S1 Trans
Axles and shift Linkage
Completly Uncut Wiring Harness
My DSM 450cc Injectors and BOV Came Today Too, Here Comes Boost
I thought JDM B16s Didn't Have The PGM-FI Plate?
More Thumbnailed Pics Here
#2
Re: B16A From Password JDM Just Got Here - 56k link at bottom (beta13)
...not even in your car yet, but you're already getting new parts for it (injectors, BOV)
That's what i like to see!
What kinda slug are you going to feed it with? t3/t4?
That's what i like to see!
What kinda slug are you going to feed it with? t3/t4?
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: Hiboosta, IL, USA
Posts: 2,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A From Password JDM Just Got Here - 56k link at bottom (BAdMutHA)
Picking up a T3 from a 2.3l thunderbird tomorrow, I think that should do it pretty well. I'm going to the bank right now to go put in some money to order my VAFC.
#5
Honda-Tech Member
Re: B16A From Password JDM Just Got Here - 56k link at bottom (WAFFLES)
only first gen b16a motors come with the pgm-fi badge on the intake mani.
congrats
congrats
yep I agree and very nice setup so far, espically(sp?) the uncut wiring harness.
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2001
Location: Fort Worth, TX, USA
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A From Password JDM Just Got Here - 56k link at bottom (mitsuman)
I got a first gen B16 intake manifold with the throttle body on it some time ago, and I also see yours, and it makes me ask a question. What it that vaccuum pot thing that is attached to the throttle cable linkage?
This thing here...........
This thing here...........
#12
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: Hiboosta, IL, USA
Posts: 2,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A From Password JDM Just Got Here - 56k link at bottom (CvexH22)
Put it on the truck with a forklift, took it off with an engine lift.
#16
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: Hiboosta, IL, USA
Posts: 2,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A From Password JDM Just Got Here - 56k link at bottom (purek9hybrid)
Is it really a USDM cover, what's the differences to look for?
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: Hiboosta, IL, USA
Posts: 2,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A From Password JDM Just Got Here - 56k link at bottom (beta13)
One last bump was he correct about it being a USDM valve cover?
#19
Honda-Tech Member
Re: B16A From Password JDM Just Got Here - 56k link at bottom (Frosty_SPL)
Dashpot slows the closing of the throttle plate under high vacuum conditions, like when you let off the throttle at highway speeds, so that no unburnt fuel goes out the exhaust.
#20
Re: B16A From Password JDM Just Got Here - 56k link at bottom (Westrock2000)
I think its because the Intake manifold came off of an AUTO B16. I know that only the AUTO b18A motors had the dash pot attached to the throtle linkage.
#21
Re: B16A From Password JDM Just Got Here - 56k link at bottom (beta13)
I think its because the Intake manifold came off of an AUTO B16. I know that only the AUTO b18A motors had the dash pot attached to the throtle linkage.
I've actually removed my dashpot as well as that other stupid little valve thingie on the intake manifold beside it. The car's much more responsive + peppy now. I figured this was fine as only the Integra-model B16As came with that extra valve - the mounting point was never drilled from the factory for it on CRX SiR model B16s.
Have fun with it!
[Modified by raene, 9:57 AM 3/25/2003]
Thread
Thread Starter
Forum
Replies
Last Post
japrex
Honda CRX / EF Civic (1988 - 1991)
60
11-18-2003 02:27 PM