HONDA300

hey guys i'm gettin ready to do my first b series swap in my 96 ek coup, i'm goin with a jdm b16a. i'm not realy sure what to expect. i need to know if i can use my stock 96 ex harness or do i use the jdm harness, i know the jdm is for right hand drive but what would be the best way to do this.one other question i had was will i be able to the stock d-series monuts or will i have to use the 99-00 si mounts. an if there is anyting eles important i should know please post up. thanks for the help

gibsanez

You need to re-use the stock engine harness and add/remove/extend any plugs necessary.