Anyone looking for an ITR motor?
#2
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2000
Location: San Jose, CA, USA
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
Impossible, unless they made ITR's in 1994.
Block #'s for ALL B18C(1,5) USDM motors:
1997 - 4XXXXX
1998 - 5XXXXX
2000 - 7XXXXX
2001 - 8XXXXX
Here's my 2000 ITR block #:
They didn't even make JDM ITR's in 1994.
Block #'s for ALL B18C(1,5) USDM motors:
1997 - 4XXXXX
1998 - 5XXXXX
2000 - 7XXXXX
2001 - 8XXXXX
Here's my 2000 ITR block #:
They didn't even make JDM ITR's in 1994.
#5
Honda-Tech Member
Re: Hes right you know (TIGER UPPERCUT)
You IDIOT!! (said with a Ren voice) The JDM ITR motor is a B18c but has the P73 part numbers. The GSR has the P72 numbers.
just thought i'd point that out.... :D
just thought i'd point that out.... :D
#6
Honda-Tech Member
Join Date: Apr 2000
Location: WI
Posts: 8,757
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hes right you know (Trey)
well, techincally.......
anything on the motor which was made for a b18c will have p72.
anything special for ITR(eg block brace) will have p73. other parts on
the motor which came from other motors such as b18a or b16a/b17a
will be stamped PR4 or PR3/P30/P61
anything on the motor which was made for a b18c will have p72.
anything special for ITR(eg block brace) will have p73. other parts on
the motor which came from other motors such as b18a or b16a/b17a
will be stamped PR4 or PR3/P30/P61
Thread
Thread Starter
Forum
Replies
Last Post