93' B18A1 into 93' Civic Coupe EX - Please HELP! Wireing!
#1
Thread Starter
Join Date: Jan 2006
Location: versailles, ky, us
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
93' B18A1 into 93' Civic Coupe EX - Please HELP!
I'm currently doing this swap.
93' b18a1 into a 93' Civic EX
My harness is pluggin up fine to the LS ecu.
My problem is the harness pluggin up to the engine.
On the passenger side I have 3 plugs out of the firewall, Only 1 the biggest one is plugging up.
On the drivers side only 1 of the 3 plugs comming out of the firewall are plugging up. 1 of the 3 plugs has a block plate so its not used.
Do I just leave these un plugged? I really don't see how it would run.
Please help. I went from a d16 to a b18c sir g and now to a b18a1. I didnt have any of these problems in my last swaps.
I bought the cable to hydro conversion, just got it in today. [got it for $35.00 shipped] and am in the process of getting all the motor mounts brackets ect, I sold the mounts that went with my old b18c ;(
Thanks for your time.
Modified by dkgoodrich at 2:16 PM 1/11/2006
93' b18a1 into a 93' Civic EX
My harness is pluggin up fine to the LS ecu.
My problem is the harness pluggin up to the engine.
On the passenger side I have 3 plugs out of the firewall, Only 1 the biggest one is plugging up.
On the drivers side only 1 of the 3 plugs comming out of the firewall are plugging up. 1 of the 3 plugs has a block plate so its not used.
Do I just leave these un plugged? I really don't see how it would run.
Please help. I went from a d16 to a b18c sir g and now to a b18a1. I didnt have any of these problems in my last swaps.
I bought the cable to hydro conversion, just got it in today. [got it for $35.00 shipped] and am in the process of getting all the motor mounts brackets ect, I sold the mounts that went with my old b18c ;(
Thanks for your time.
Modified by dkgoodrich at 2:16 PM 1/11/2006
Thread
Thread Starter
Forum
Replies
Last Post
turbotime
Honda Civic / Del Sol (1992 - 2000)
3
03-15-2004 08:55 PM