Here's the dilemma-

I got an AWESOME car for an AWESOME price- with the #4 cyl BLOWN BADLY! I have an SH and now I have a Base engine I picked up used and running. I want to dump the ATTS and it will not mount up anyways.

What do I need to finish the swap? I have the intermediate shaft on its way, new. and I am going from a sh engine block to a base engineblock, all of the stuff I have seen is for tranny swaps or adapter plates. Is that even necessary for swapping to the base engine? Will the trans. require anything additional or will it just bolt up with the intermediate shaft? Will this lock up the wheels like a spool? I am not sure but the ATTS was the differential, and if it is gone, there is not a diff in there is there? is it streetable if this is the case?

The engine and trans bolted up and I replaced the clutch while I had it on the floor.
Anyone who reads this post, please feel free to post links for the needed parts to finish this swap. Thanks!!

Specs: 97 SH with a Base H22A4
need to bypass the ATTS
New intermediate shaft