H22A fuel injector issues
06-23-2006, 01:48 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Raleigh, NC, US
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
H22A fuel injector issues
I just got a '92 CX with an H22A4 in it. It was pretty poorly setup and I'm fixing the issues with the car now. I've picked up a P13 ecu, a H22A1 OBD1 complete harness, and some better mounts. The question is, I know that the OBD1 'lude came with low-impedance injectors and I plan on switching either to the 345cc injectors that were supposed to be in an OBD1 H22 or some 360cc DSM's. (Mainly because they are a lot cheaper) So, do I still need a resistor box to run the low impedance injectors, or with the ECU work with them with out it?
Thread
Thread Starter
Forum
Replies
Last Post
spraymysol
Honda CRX / EF Civic (1988 - 1991)
9
12-08-2008 02:48 PM
