wiring CKP sensor
04-08-2012, 07:13 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2007
Location: Warren, Mi, US
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
wiring CKP sensor
Hey guys,
-I'm planning on overlaying an open in my CKP sensor wiring circuit from the 8-pin plug off my OBD1 distributor straight to the ECU which should be B15.(its the BLU/GRN wire)
-The problem is that its a braided wire.(with the BLU/YLW wire)
-Could i just run a new wire straight from the 8-pin connector to my ECU?
-OR will i have to overlay both wires from the CKP sensor(the BLU/YLW and the BLU/GRN wire) and twist them together?
-OR does the term "braided wire" mean something else?
any suggestions would be great.
AND THANKS IN ADVANCE
-I'm planning on overlaying an open in my CKP sensor wiring circuit from the 8-pin plug off my OBD1 distributor straight to the ECU which should be B15.(its the BLU/GRN wire)
-The problem is that its a braided wire.(with the BLU/YLW wire)
-Could i just run a new wire straight from the 8-pin connector to my ECU?
-OR will i have to overlay both wires from the CKP sensor(the BLU/YLW and the BLU/GRN wire) and twist them together?
-OR does the term "braided wire" mean something else?
any suggestions would be great.
AND THANKS IN ADVANCE
Thread
Thread Starter
Forum
Replies
Last Post
Acc3l3ratoR
Honda Civic / Del Sol (1992 - 2000)
1
05-01-2019 07:41 PM
Honda Sport
Hybrid / Engine Swaps
16
09-15-2005 03:39 PM
AdamITR
Honda Civic / Del Sol (1992 - 2000)
2
05-14-2003 05:44 PM
