NWPencrawler

1991 Honda Civix DX Hatchback - I bought it with no seats in it. I intend to put a race seat in it later down the road, but would like to install a stock seat for now so I can more easily move the car around.
I did an initial search and see a lot of threads for installing CRX or Integra seats in these EF hatch models but I'm more interested in just a stock seat (for now).
My question is, will a stock drivers seat from a DX 4-dr sedan bolt in to a DX hatch without any mods?
Thanks for any help,

Paul

Maxcapacity

Only 90/91 EF hatch seats will bolt in. You can use a EG drivers side seat, all the bolts line up except 1, you can bolt it through the slider rail using a washer and some as spacers which will be needed as someone had done mentioned in another thread.. Not sure about the passenger side..
The crx or integra may be the same situation as to bolting in with not all holes lining up.

NWPencrawler

Thanks Maxcapacity! I'm just needing a temporary seat for now while we build this up as a Lemons race car. 3 holes will work fine since it's never seeing street use. Just using the seat to move it around the property. Race seat will come later in the build. I appreciate it very much!