will a stock obd0 pr4 teg computer start a....
#1
will a stock obd0 pr4 teg computer start a....
d16y7?
I had a no spark issue and it turned out the ecu was fried. i got a stock pr4 and installed it. the car is obd0. i plugged in the stock pr4 and still no spark.
but i have no idea if the car should even spark with that ecu stock.
car is an 88 hatch obd0 d16y7 turbo
I had a no spark issue and it turned out the ecu was fried. i got a stock pr4 and installed it. the car is obd0. i plugged in the stock pr4 and still no spark.
but i have no idea if the car should even spark with that ecu stock.
car is an 88 hatch obd0 d16y7 turbo
#4
Re: will a stock obd0 pr4 teg computer start a....
got it semi running. map sensor was bad and spark was good just not what i was used to seeing (other car is a lt1 ta with a msd coil and msd6al) now it starts on the stock pr4 tune but doesnt idle not that i really expect it to with the 440 cc injectors.
I am waiting for someone to swap my socket over so i can plug in my tuned chip
I am waiting for someone to swap my socket over so i can plug in my tuned chip
Thread
Thread Starter
Forum
Replies
Last Post
OneFlyCrxGuy
Honda CRX / EF Civic (1988 - 1991)
3
11-23-2010 06:57 PM
turbosol18
Forced Induction
3
08-31-2007 09:21 PM