SloA$$ DA

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lost_in_a_world_so_cold &raquo;</TD></TR><TR><TD CLASS="quote">


maybe you have a fat ***!!

and...... I have an hf yes but,


the one in front of mine is ans si. and it has........si seats!!


</TD></TR></TABLE>

hehe i know what street that is

junior40er

yes im fat. soo

george34

I don't see how you guys that are 6'5'' can fit in an EF. My brother that is 6'2'' has very little space between his head and the roof. I guess it depends on how long you legs are.

dabrat8614

im 6'6" and i have eg seats in my ef

EF_ST@TUS

I used 97' Del Sol seats.
- First, you have to swap passenger seat with drivers seat. This worked out because the driver's bolster was worn from getting in/out. This puts the recliner on the inside and the slider control on the outside.

- Next I used the CRX inner rail's and the Del sol's outer rails. The crx inner rails should bolt right up to the del sol brackets with no modification.

- Marked and drilled a hole in the seat support beam of the front outer bracket(by the door) and used the biggest bolt I could find to brace it.

- Its almost impossible to get a nut on the back, because of the support beam being enclosed, except for a few small holes across the back. I haven't got it on yet, but you just have to use a jigsaw to enlongate a hole just enough to fit a wrench in to hold it, or you could use a really big drill bit and make a hole just big enough to fit a socket through.

- For the back I used a piece of steel to make a custom flat bracket that connected the gap between the stock mounting hole and the seat rail.

Viola!! Just what I did.. I figured if I wrote all this it might be useful to someonoe.

No2Pencil

im six foot and my seat is the farthest back it can go

TallKyle

i am like 6 foot 7 and i fit in my 4 door with room. Just sit a little gangsta and you will fit well. The stock 4 door seats sit high also. I never complain.

for hella tall people

JamesV

im too fat i start slouching

TallKyle

i am 6 '7 290 pounds.

JamesV

6foot 270ish
i had a ef 4 door i felt good in those but in my current EG hatch with integra seats i dont feel right.. so i dont know .. i never been in a EF hatchback before

vtecn8ive

Del Sol hold better then Crx Si seats. I know cuz I own both and both are in EFs (eds). Both are in good/great condition.



Also if you need to install the Del Sol seats looking my name up I did a How-to for 88-89 Civic HBs.

Also I'm 6-2 and i fit just fine in the Del Sol seats in the 88 Civic HB

JamesV

thanks

HackeN

6'4" with del sol seats in my 90 hb si, fit fine.
I also have a pair thats going in my 90 crx si until I get a pair of mint stockies :/

SkyliteCustomz

to: James.SlowEH


HEY BRO..u'll fit fine in my HB with the del sol seats..haha u still looking to trade? hit me up

JamesV

are you the one with the grey hb with del sol seats

SkyliteCustomz

haha yea dats me bro

91ed9

6'0 260 lbs and i have prelude seats in my 91 crx Si and myhead touches the roof constanly and i kinda slouch they sit way to high