EF.IT.UP 's 88 Krx Build (slow)
#77
Re: EF.IT.UP 's 88 Krx Build (slow)
Nice job. When you spraypainted the engine and trans, make sure to recheck the paint overspray on stuff like your axle seals for the tranny and the hole for the PCV tank on the back of the block so the paint doesnt get on the o-ring when installed.
#79
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Yeah I went over all the gasket areas and seals and scraped it off before install.
#80
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
#81
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Got some tires on clutch bled. Took it for a quick rip around the block and it drove amazingly! Hopefully next time im back it will be getting the remaining glass installed and an allignment and she will be road ready.
6uls fit amazing
Nardi wheel installed.
Squad! My bros teg just finished putting the lip on.
#83
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Cars not done yet. Many more things to come. Just been working a lot. I'm only home every third week. I have some parts on the way currently but probably won't arrive until I'm back from my next shift.
#84
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Did a few things tonight, hopefully finish the other side tomorrow.
Quite a bit of room. Sit a little higher than normal but not much.
Suits the car.
Fixed mounted. No sliders
Quite a bit of room. Sit a little higher than normal but not much.
Suits the car.
Fixed mounted. No sliders
#85
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Got the remaining glass installed today !!
Still missing a couple trim bits. Have them ordered just playing the waiting game.
Bumper light mod!
I also installed some hasport shift linkage, still haven't made my intake, hopefully I will be able to drive it for a little bit while it's still nice. Thinking about sending my spare b16a block to golden eagle to have it sleeved and maybe go boosted over the winter.
Still missing a couple trim bits. Have them ordered just playing the waiting game.
Bumper light mod!
I also installed some hasport shift linkage, still haven't made my intake, hopefully I will be able to drive it for a little bit while it's still nice. Thinking about sending my spare b16a block to golden eagle to have it sleeved and maybe go boosted over the winter.
#86
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Thought ugh I would revive the thread! The car runs and drives tranny needs some syncros. Want to go turbo but with the exchange rate between Canada and the us I'm not sure I can justify paying almost double for parts.
Got the remaining glass installed today !!
Still missing a couple trim bits. Have them ordered just playing the waiting game.
Bumper light mod!
I also installed some hasport shift linkage, still haven't made my intake, hopefully I will be able to drive it for a little bit while it's still nice. Thinking about sending my spare b16a block to golden eagle to have it sleeved and maybe go boosted over the winter.
Still missing a couple trim bits. Have them ordered just playing the waiting game.
Bumper light mod!
I also installed some hasport shift linkage, still haven't made my intake, hopefully I will be able to drive it for a little bit while it's still nice. Thinking about sending my spare b16a block to golden eagle to have it sleeved and maybe go boosted over the winter.
#89
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
I got some downstar hardware for the fenders, t-bar and hood. Also cut the belt cover off the valve cover and got an intake on.(still need a new intake boot tho) also got a mishimoto coolant overflow. Also have a new set of carbon sunchros and a Mfactory lsd that will get installed soon. Also put ctr cams in and new valvestem seals and polished the valves.
#90
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: Calgary Alberta
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EF.IT.UP 's 88 Krx Build (slow)
Sorry for the lack of updates, I have been trying to record things I do on YouTube, but still have to make a lot of footage, edits and so on. But I will try and update more as I go.
Thread
Thread Starter
Forum
Replies
Last Post
SupaSedan
Honda Civic / Del Sol (1992 - 2000)
1
11-20-2007 10:36 AM
mattcivic
Honda CRX / EF Civic (1988 - 1991)
12
03-20-2007 04:19 PM
kartracer4
Honda CRX / EF Civic (1988 - 1991)
4
06-25-2005 01:28 PM