Why would an auto ecu work but not a manual
10-22-2005, 05:55 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: Milton Keynes, NA, UK
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Why would an auto ecu work but not a manual
This must be something really simple.....or the manual ECU is fried (but it worked fine when I took it out the manual car and I havent done anything to it since!)
Any ideas/suggestions as to why the manual P2E-G01 would not work when a P2E-G51 works (with only the auto trans lockup CEL)?
With the manual ECU the car will not start...but the dask all lights up as they should. I pulled a plug but it is not sparking "rapidly", only every couple of turns?
EDIT - the car is manual, and the engine is out the manual with the manual wiring loom on the engine side.
Any ideas/suggestions as to why the manual P2E-G01 would not work when a P2E-G51 works (with only the auto trans lockup CEL)?
With the manual ECU the car will not start...but the dask all lights up as they should. I pulled a plug but it is not sparking "rapidly", only every couple of turns?
EDIT - the car is manual, and the engine is out the manual with the manual wiring loom on the engine side.
Thread
Thread Starter
Forum
Replies
Last Post
fryman
Honda Civic / Del Sol (1992 - 2000)
10
03-24-2023 01:40 PM
Retribution
Honda Civic / Del Sol (1992 - 2000)
8
08-03-2005 03:42 PM
Magick211
Honda CRX / EF Civic (1988 - 1991)
11
10-22-2004 05:18 AM
