straywise

Which seat fits better in EK the DC2 rear seats or the DB8? I want it to look stock, with no big gap between the seats, Thank you in advance for your time

96ex

If its a hatch...DC2 rear seats. If its a coupe DB8 rear seats(with some modifcations). I have the DB8 rear seats in my coupe.

Nova_Dust

I believe some folks swap the seat cover and keep the same EK rear seat skeleton.

illicon2003

dc2's should fit fine. There's a how to write up somewhere on here. You just have to drill 2 holes in your interior rear quarter panels in a place that's not even visible I believe

Ricey McRicerton

WTF is a DB8?

Nova_Dust

DB8 is 4 door Integra, also comes in Type R


Modified by Nova_Dust at 7:21 AM 4/26/2004


Modified by Nova_Dust at 7:22 AM 4/26/2004

6SPD_EK

iTrader: (2)

db8's rear seat backs are 1 piece (ie rear bench) fold down not a 50-50 split like dc2's

best fit would be a db8 bottom section (wider than dc2) & skins swapped over from a d2c 50/50 back good luck finding any willing to part those sections tho

96ex

To fit the DB8 rear seats in a coupe you must have the top part of the seat rewrapped onto your existing OEM seats or modify your rear quarter panels.

straywise

I have done some reseach and I am not happy with the big gap of the DC2 in the EK. I was thinking of just finding an auto upolstery shop and see if they can replicate, the seats, probly be half the price, maybe.