dirvin7588

OK so im sure some of your have read my previous problems...if not research it haha but anyways...I got the D15b Jdm block and Y8 head...using eveything off my old head, dizzy, intake mani, ect. I get everything together finally yesterday ready for crank and it sounds like its not hitting on a spark. I pull a wire no spark at all. I noticed the Dizzy does have alot of play as far as adjustment and someone told me that the slightest adjustment matters. i smell gas from pumping the pedel making sure it was primed and trying to shove gas through the line. so im stumped i took out the dizzy realigned it. loosened it and rotated it a little one way then a little another. any help would be appreciated. Thanks!

grumblemarc

iTrader: (4)

Are you not supposed to be using the Y8 distributor?

dirvin7588

i believe i should use the y8 dizzy cuz the y8 head? if im wrong please correct me. i do have the d15 dizzy just didnt hook it up cuz it was late wraping up last night it didnt start, i didnt find any spark, i called it a night lol. I just figured y8 head y8 dizzy, cuz i also head using the d15b head i would still need my y8 dizzy? so please let me know

Ayyxbro

yeah your gonna need to use the y8 dizzy and spark wires

dirvin7588

Ok I figured it out....groind on the thermostat wasn't correctly grounded...car starts and runs!! Thanks everyone for the help on this build I'm sure ill have more questions in a few hours haha. THANKS AGAIN HONDA TECH!!