xivera

Hey, guys... I need your help. My uncle is offering to sell his '95 Canadian Si coupe (stick shift). I have a '96 EX coupe automatic. [If I/we buy, the wife wants me to take off the noisy parts off the '96 since she would drive that. (Shoot, I'll take off nearly everything!)] However, my decision to buy his Si heavily depends on if I can put my parts in/on his Si. Of my parts, I'm concerned if my Progress rear sway bar, Neuspeed header, and my Greddy P.E. exhaust can be easily installed... with no hitches/hassles.
Do you guys have any input towards this?

Spade

Sway bar....nope.
Header....yes.
Exhaust.....won't fit "just right"

xivera

Thanks

xivera

Oh wait... Won't I have problems with my OBD-II header? You know the 2 sensors...

jerbear!

rear sway bar shud work but headers wont. arent b and d series header different?

MPsquad

Mechanically the header will work. The O2 sensor wiring is different, but I have done it with little hassel. I'm sure you can get it to work.

The exhaust will bolt on, just be a really tight fit. Also the tail pipe will stick out an extra (estimated) 3" and the muffler can could hit the bumper. I have a coupe exhaust on my 92 Civic HB and this is what I experienced.

Ricey McRicerton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jerbear! &raquo;</TD></TR><TR><TD CLASS="quote">rear sway bar shud work but headers wont. arent b and d series header different?</TD></TR></TABLE>

You don't read much eh?

The canadian SI (95) is a good ol US of A EX.

They'll swap over just fine, with no wiring ^^ (you're wrong bud).

jerbear!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">

The canadian SI (95) is a good ol US of A EX.

.</TD></TR></TABLE>

ahh my bad i didnt know the si's were different in canada too!