civperc

I can pick up a quality strut tower for pretty cheap locally today, but I have an AEM SRI on my 98 DX and was wondering if there might be any fitment issues like the pipe bend at the throttle body hitting the strut tower? anyone have any experience with this>? thanks y'all.

HATCHingMN

Should not hit your intake!!

civperc

cool, thanks

civperc

any other feedback is still welcome

fake mugen power

should fit fine, unless you have a jumbo ghetto garage intake.!

HATCHingMN

Look at my huge intake it still fits....

Evs-One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HATCHingMN &raquo;</TD></TR><TR><TD CLASS="quote">Should not hit your intake!!</TD></TR></TABLE>

do you know this for sure??

I don't think so.

Desn't thje DX have the vertical throttle body.....

pdiggitydogg

they are vertical....i bet you'll have some probs...
change to a y8 intake manny and you can rock it

dsadas89das78934

it will likely hit the strut bar at idle... i fixed it by putting a little square of Dr. Scholls foot padding on the bottom side of the strut bar where it hit..

pornstarSR

yes, depending on the strut tower it will hit the intake... most straight bars will hit

mine hit...so i took it off, i think the neuspeed ones wont hit cause it shifts the bar forward....

you could get a y8 IM and never have a problem again...

thats what i did

undertheradar

Yeah...the straight aftermarket kind of bars will hit...I got a Si bar and it fits perfectly.

civperc

yeah the kind I'd like to get bends up, as opposed to the straight models. If it still hits, I could do what soccacian said

thanks for the feedback everyone.