REAR disk conversion
#1
Thread Starter
Join Date: Oct 2002
Location: never never, land, USA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
REAR disk conversion
im not sure where to post this question..so i am posting here and also in the TECH forum..sorry if this is the place but i was wondering what all do i need exactly to put on 94+ integra rear disk onto my 93 DX hatchback..if anyone could let me know everything that i would need for the brake swap id appreciate it.because i think imma go to the junk yard tomorrow and pick some up.. thanks.
#3
Re: REAR disk conversion (EGsixer)
you came to the right place, but there's lots of haters on the forum that don't feel like helping if you don't use the search first.
try this
https://honda-tech.com/zerothread?id=152884&page=1
try this
https://honda-tech.com/zerothread?id=152884&page=1
#4
Thread Starter
Join Date: Oct 2002
Location: never never, land, USA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: REAR disk conversion (intezn)
you came to the right place, but there's lots of haters on the forum that don't feel like helping if you don't use the search first.
try this
https://honda-tech.com/zerothread?id=152884&page=1
try this
https://honda-tech.com/zerothread?id=152884&page=1
#5
Re: REAR disk conversion (EGsixer)
like i said ("if anyone could let me know everything that i would need for the brake swap") that means EVERYTHING. and not that link to that post that didnt help me find out nothing. it didnt answer my question buddy. [/QUOTE]
damn dude chill.... this topic is covered at least 3 TIMES a week, but since im such a good semeritan i'll help you out.
you need the whole trailing arm assembly off an integra, plan on getting new brake lines, rotors, and pads. then you need a new prop valve(40/40) and master cylinder (15/16).
next time just SEARCH.
Thread
Thread Starter
Forum
Replies
Last Post
brettric
Honda Accord (1990 - 2002)
1
10-08-2004 09:25 AM