Project: mr teal EG6
#1
Honda-Tech Member
Thread Starter
Project: mr teal EG6
Hey everyone. I've got some good income this summer and decided to make a project out of my "beater."
So today is the official start date of a never ending project. Here's a list of some plans:
-GSR Rear disc conversion
-New Front Rotors and Pads
-Buddy Club Exhaust and Test Pipe
-CF Hood
-Roll Cage
Thats just to name a few. And since this is a technical forum, I will be providing as much info as possible (as well as pictures) when I'm working on the car.
Here are some pictures that I already had on we-todd. I'll take some more today to show yall the car.
Very old pic. This is just after my drivers door backed into a mailbox.
A couple of friends
The Original Window Sticker.
Dyno Chart.
d16z6 with header, intake, cam gear, b16 TB, and stock CX piping
Maybe one day this will be my engine bay.
More pics and info to come!!
(all pics are taken with the worst camera in the world, a Nikon Coolpix 4.0 mp 6100)
Modified by drewbie at 12:17 PM 5/13/2006
So today is the official start date of a never ending project. Here's a list of some plans:
-GSR Rear disc conversion
-New Front Rotors and Pads
-Buddy Club Exhaust and Test Pipe
-CF Hood
-Roll Cage
Thats just to name a few. And since this is a technical forum, I will be providing as much info as possible (as well as pictures) when I'm working on the car.
Here are some pictures that I already had on we-todd. I'll take some more today to show yall the car.
Very old pic. This is just after my drivers door backed into a mailbox.
A couple of friends
The Original Window Sticker.
Dyno Chart.
d16z6 with header, intake, cam gear, b16 TB, and stock CX piping
Maybe one day this will be my engine bay.
More pics and info to come!!
(all pics are taken with the worst camera in the world, a Nikon Coolpix 4.0 mp 6100)
Modified by drewbie at 12:17 PM 5/13/2006
#4
Honda-Tech Member
Thread Starter
Re: Project: mr teal EG6 (BlueIntegraBoy)
OK I've done a little work to the car.....I sealed up the crack in the rear bumper.....
Here are some pics of the car and the crack I fixed.
No front bumper so I could fix the horn(right below the drivers right corner lamp)
The car from the back. Whats that yellow thing?
1970 Rallye 350 Cutlass
This was underneath the carpet.
Check out my homemade racing seat
This is my rear trunk board I made. It works very well.
A friend backed into me
Nasty Crack
Just wanted to clean up all the carbon from no muffler
Clean as I could get it.
JB Weld can fix anything.
Heres the inside weld.
Its not pretty, but it works!!
NEWS
My Buddy Club Spec II should be in by Friday, as well as my new rotors and Carbotech pads.
Maybe I'll finally have interesting pics by then
Modified by drewbie at 12:16 PM 5/13/2006
Here are some pics of the car and the crack I fixed.
No front bumper so I could fix the horn(right below the drivers right corner lamp)
The car from the back. Whats that yellow thing?
1970 Rallye 350 Cutlass
This was underneath the carpet.
Check out my homemade racing seat
This is my rear trunk board I made. It works very well.
A friend backed into me
Nasty Crack
Just wanted to clean up all the carbon from no muffler
Clean as I could get it.
JB Weld can fix anything.
Heres the inside weld.
Its not pretty, but it works!!
NEWS
My Buddy Club Spec II should be in by Friday, as well as my new rotors and Carbotech pads.
Maybe I'll finally have interesting pics by then
Modified by drewbie at 12:16 PM 5/13/2006
Thread
Thread Starter
Forum
Replies
Last Post
spock_rocker
Honda Civic / Del Sol (1992 - 2000)
24
05-02-2004 07:34 PM