problem with the es bushings
01-06-2008, 07:46 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: Somewhere, Ny
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
problem with the es bushings
So i did the shifter bushings on my car this weekend and i had a problem getting the trani side one on so i put the stock one on for now.
I have the sohc ones on (the one where the bushing is split in half) and everytime i put them into the linkage they pop back out is there any tips on how to hold them into place? i tried a c-clamp but than the metal sleeve still has to go in the middle so as soon as i move the clamp over they pop
I have the sohc ones on (the one where the bushing is split in half) and everytime i put them into the linkage they pop back out is there any tips on how to hold them into place? i tried a c-clamp but than the metal sleeve still has to go in the middle so as soon as i move the clamp over they pop
Thread
Thread Starter
Forum
Replies
Last Post
DOUBLExDEUCEx22
Honda Civic / Del Sol (1992 - 2000)
5
12-19-2009 01:25 PM