power steering rack in a non-ps car
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: all your base are belong to us, usa
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
power steering rack in a non-ps car
i have a 95 dx, and have to turn the wheel like 20 times to get lock to lock. is anyone using a ps rack from a civic si or an integra, but not using ps?
i just want to know if its going to be too hard to turn.
thanks
i just want to know if its going to be too hard to turn.
thanks
#3
Re: power steering rack in a non-ps car (Zer0DazE)
I just did this with my PS rack:
https://honda-tech.com/zerothread?id=184202&page=1
Only cost me $5.00 at Home Depot for the parts and i used an old clutch slave cylinder resevoir for the breather. Check it out...
https://honda-tech.com/zerothread?id=184202&page=1
Only cost me $5.00 at Home Depot for the parts and i used an old clutch slave cylinder resevoir for the breather. Check it out...
#4
Honda-Tech Member
iTrader: (1)
Re: power steering rack in a non-ps car (JV)
Got any pics JV? I would like to see this setup, I have read thru the article on how to do it and i would like to try this on my Civic...also with a DX steering rack... I plan on getting an ITR/GSR rack to replace it soon enough...
#5
Re: power steering rack in a non-ps car (Blue-Civic-Hybrid)
No pics, i just did it yesterday actually. I'll try to borrow a digicam and make up a Home Depot parts list sometime soon...
Thread
Thread Starter
Forum
Replies
Last Post
Battle Monkey
Road Racing / Autocross & Time Attack
5
08-05-2016 03:14 AM
fsp31
Road Racing / Autocross & Time Attack
18
04-29-2003 05:10 PM