Possible Rod Bearing going bad in 99 Civic EX?
#1
Possible Rod Bearing going bad in 99 Civic EX?
my brother said he heard a knocking noise that may be a rod bearing going bad, and although he knows alot more about cars than I do, neither of us are experts.
Can anyone tell me if my engine sounds normal or if something is wrong?
MVI 2128 - YouTube
P.S. I rev'd it to about 2500-3000 rpm.
My car has around 101,500 miles on it.
Can anyone tell me if my engine sounds normal or if something is wrong?
MVI 2128 - YouTube
P.S. I rev'd it to about 2500-3000 rpm.
My car has around 101,500 miles on it.
#5
Re: Possible Rod Bearing going bad in 99 Civic EX?
#6
Honda-Tech Member
Re: Possible Rod Bearing going bad in 99 Civic EX?
#7
Honda-Tech Member
Re: Possible Rod Bearing going bad in 99 Civic EX?
sounds pretty normal but when rod knocks start they are very faint when caught early. u will start to hear them at idle. do a valve adjustment and see if u can get that valve chatter a little quieter. intake .007- exhaust .009
Trending Topics
#9
Re: Possible Rod Bearing going bad in 99 Civic EX?
Adjust the valves. Remember, these guys are pretty loud to begin with. Noisy heads, along with the injectors clicking.
Rod knock is quite loud, you would know something is wrong quick.
Rod knock is quite loud, you would know something is wrong quick.
#10
Honda-Tech Member
Re: Possible Rod Bearing going bad in 99 Civic EX?
could be knock. my lude would be very faint and id beileve it was just valve noise but a month later it got so bad i could not drive it
Thread
Thread Starter
Forum
Replies
Last Post
imadigitalgod
All Motor / Naturally Aspirated
15
08-06-2006 08:30 PM