Need info, VX block specs, Z6 head specs
11-26-2002, 06:35 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Need info, VX block specs, Z6 head specs
Wanted to do a rough calculation of my compression on my mini-me. Looking for
1. VX(d15z1): block bore in mm
2. VX(d15z1): stroke in mm
3. VX(d15z1): piston dome displacement (p03 maybe ? )
4. VX(d15z1): piston to deck height
5. SI(d16z6): Combustion Chamber Volume (cc per cylinder)
basically the info for this calculator http://www.c-speedracing.com/howto/c.../compcalc.html
I know the VX block comes at 9.3:1, am wondering what its at with the z6 head, and then thinking of decking the block. Claying before thats done of course.
1. VX(d15z1): block bore in mm
2. VX(d15z1): stroke in mm
3. VX(d15z1): piston dome displacement (p03 maybe ? )
4. VX(d15z1): piston to deck height
5. SI(d16z6): Combustion Chamber Volume (cc per cylinder)
basically the info for this calculator http://www.c-speedracing.com/howto/c.../compcalc.html
I know the VX block comes at 9.3:1, am wondering what its at with the z6 head, and then thinking of decking the block. Claying before thats done of course.
11-26-2002, 09:07 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need info, VX block specs, Z6 head specs (uncivilCivicinprogress)
hum, those stats would be in the helms wouldnt they......maybe i should get mine from the car and look 
sigh, feeling stupid/sick/tired right now ;p
sigh, feeling stupid/sick/tired right now ;p
11-26-2002, 10:56 PM
#7
D Tranny Guru
Re: Need info, VX block specs, Z6 head specs (splitime)
1 = 75 mm
2 = 84.5 mm
3 = no clue
4 = no clue
5 = 34.6 cc
D15Z1 piston......
on the left, vs. a D15B7 piston.....
2 = 84.5 mm
3 = no clue
4 = no clue
5 = 34.6 cc
D15Z1 piston......
on the left, vs. a D15B7 piston.....
Trending Topics
I had to IM you since Dave doesn't listen to me
Thread
Thread Starter
Forum
Replies
Last Post
