Need Clarification: DC knuckles on an EK
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: 63026
Posts: 1,330
Likes: 0
Received 0 Likes
on
0 Posts
Need Clarification: DC knuckles on an EK
From what I understand the front knuckles are 1/2 in taller on the DC's than the EK. I have a 2000 Civic Si that I am getting ready to do my 5 lug on. I have the bearings and the hubs and a set of LS knuckles, but was unsure if the suspension geometry would be thrown off on the EK with the DC knuckles. If they are in fact taller the camber will be off I know that much. Any help ASAP would be appreciated, I want to get started on this tonight.
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: 63026
Posts: 1,330
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Clarification: DC knuckles on an EK (BlueIntegraBoy)
I was told by a few respectable members on this site that the Integra knuckles were 1/2in longer and would cause negative camber is used on a EK chassis car.
Thread
Thread Starter
Forum
Replies
Last Post
MARVNVRAM
Honda Civic / Del Sol (1992 - 2000)
2
12-13-2007 06:15 PM