My GSR swap thread (please help) pics inside;)
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
My GSR swap thread (please help) pics inside;)
Well today i finally made it out to my EG hatch. I finally got the GSR swap I have wanted. I traded my old Del Sol for a newly built B18c1.
It has.
Mahle pistons,
Eagle H beam rods,
Complete Mahle valve train (springs,retainers,valve)
Micro polished crank
Dizzy six puck clutch
Skunk 2 intake Manifold
Power throttle body port matched to the intake manifold
LS tranny
Ebay header
chipped p72
Here is some pics of everything i got done today.
MY BABY!!!!!!!!!!!!!!!!
My Boosted D16z6
GOODBYE SOHC!!!!!!!!!!! cough (for sale) cough
Sorry kinda got caught up my old man stopped by to help and we banged it out fast. so i didn't take an pics of the pull.
Ok now Here is where i Beg for help. This is my first B series motors. I thought i could use my old shift linkage from my D series but i found out that its not going to work. Sooooo what linkage do i use????????????????????????
Here is a pic of the linkage
This is my D series linkage
Well that is it for tonight so shoot me some feedback.
It has.
Mahle pistons,
Eagle H beam rods,
Complete Mahle valve train (springs,retainers,valve)
Micro polished crank
Dizzy six puck clutch
Skunk 2 intake Manifold
Power throttle body port matched to the intake manifold
LS tranny
Ebay header
chipped p72
Here is some pics of everything i got done today.
MY BABY!!!!!!!!!!!!!!!!
My Boosted D16z6
GOODBYE SOHC!!!!!!!!!!! cough (for sale) cough
Sorry kinda got caught up my old man stopped by to help and we banged it out fast. so i didn't take an pics of the pull.
Ok now Here is where i Beg for help. This is my first B series motors. I thought i could use my old shift linkage from my D series but i found out that its not going to work. Sooooo what linkage do i use????????????????????????
Here is a pic of the linkage
This is my D series linkage
Well that is it for tonight so shoot me some feedback.
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: My GSR swap thread (please help) pics inside;)
sweet sounds good thats what i figured just wanted to make to make sure before i drop coin. will my throttle cable work? i had trouble with the one bracket on the intake manifold. the one off my d series does not line up with the holes. i didn't know if this cause its a B series or an aftermarket intake manifold.
#7
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: My GSR swap thread (please help) pics inside;)
sweet sounds goods. thanks guys. I will be pulling my 450 injectors off my SOHC. my little Greddy turbo will be going on this motor once i get it running.
Trending Topics
#8
Honda-Tech Member
Join Date: Jul 2007
Location: so.ca
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#9
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: My GSR swap thread (please help) pics inside;)
Anyone Use this mount? Im trying to figure out if it will work with my Skunk 2 intake manifold. I think it should but want to double check.
http://cgi.ebay.com/ebaymotors/INNOV...item2c5640e7c0
http://cgi.ebay.com/ebaymotors/INNOV...item2c5640e7c0
#10
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: My GSR swap thread (please help) pics inside;)
ok guys lets talk turbo size. i wanna make at least 450 with this motor. i am going to buy my turbo and injectors after the holidays. so what size turbo do you think would go well. This will be a mostly track car but i still wanna be able to take it out and beat on the kids in the hood with it.
#13
Honda-Tech Member
Join Date: Jan 2003
Location: can't find parking in baltimore
Posts: 3,156
Likes: 0
Received 0 Likes
on
0 Posts
#16
Thread
Thread Starter
Forum
Replies
Last Post