Mini me engine issues?
#1
Mini me engine issues?
Hi ,
I have a thing going on with my motor.
Its a d15b with a z6 head 5spd.
Okay so i recently did a intake manifold swap. i had a weird manifold with no name and I swapped it out with a p08 stamped one,
I have all the lines connected and all plugs plugged in the sensors.
The problem is when i turn the car on and rev and let it idle the car sometimes drops below zero and when i press the gas pedal the rpm doesnt even go passed 1k. Sometimes the car wont rev past 2k rpm. Can this be a vacuum issue? Should I tighten the intake manifold a bit more?Ill have a video link on here soon. Thanks.
I have a thing going on with my motor.
Its a d15b with a z6 head 5spd.
Okay so i recently did a intake manifold swap. i had a weird manifold with no name and I swapped it out with a p08 stamped one,
I have all the lines connected and all plugs plugged in the sensors.
The problem is when i turn the car on and rev and let it idle the car sometimes drops below zero and when i press the gas pedal the rpm doesnt even go passed 1k. Sometimes the car wont rev past 2k rpm. Can this be a vacuum issue? Should I tighten the intake manifold a bit more?Ill have a video link on here soon. Thanks.
Last edited by Hyunbs; 09-09-2013 at 08:32 PM. Reason: Forgot one thing.
#2
Honda-Tech Member
Join Date: Jan 2004
Location: houston, texas, usa
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
#3
Thread
Thread Starter
Forum
Replies
Last Post
CSHornet60
Honda Civic / Del Sol (1992 - 2000)
8
02-08-2007 09:32 AM
Bulldogg83
Tech / Misc
6
10-18-2003 12:18 PM