delcamino

ok i have a delsol vtec and i have a question on the installation of my suspension. The spring perches that come with the rear shocks--which direction do these face? do they face like this:/\ or like \/. sorry for the lame pics. if they are facing like this \/ the adjustability of the sleeve is almost non existant, but if they are facing like this /\ will the coilover sleeve slam down on to the perch? Sorry im not very good at explaining things, any imput will be very helpful. and if anyone has pics i would really appreciate it. Thanks in advance

robinson

put the pearch like this \_/ for the front and back to maintain stock height. The adjustments are the rings around the shock. There should be 5 of them. The middle one is stock height.

B18C-EJ1

Or you can do like I did and remove the cup completely. Use the ring that Koni supplies to support the coilover sleave.

E.g.-




[Modified by B18C-EJ1, 10:33 AM 2/28/2002]

delcamino

sweet thanks alot---what do you all have your shocks set at?

B18C-EJ1

The very minimum.

I'm actually selling my Koni/Skunk setup to go for the Tein's.

JDM_SiR_II_EG

B18c-EJ1 what upper control arms are those?

B18C-EJ1

Skunk2 upper arms.