idle problems by bent valve ???
03-07-2011, 01:03 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2009
Location: somerset ma.
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
idle problems by bent valve ???
hey guys i have a 95 civic with a 97 ls swap the cars been running fine but one of my exhaust valves for cylander 3 keeps coming loose so i changed it and it happened again so i tightened it went to start my car and now it idles at like 500 rpms or if i come to a stop it will just stall out but if it idles for like a min or two it will go up to 1k and stay there .... was told i might have bent a valve from tightening it to tight but the car runs strong when driving just wont idle right lmk what you guys think - thanks
Thread
Thread Starter
Forum
Replies
Last Post
James648405
Honda Civic / Del Sol (1992 - 2000)
1
06-01-2010 12:32 PM
James648405
Honda Civic / Del Sol (1992 - 2000)
3
01-14-2010 09:13 AM
vlc92189
Honda Civic / Del Sol (1992 - 2000)
4
11-14-2007 06:52 AM
jdmBOMEXsi
Honda Civic / Del Sol (1992 - 2000)
25
03-16-2005 11:52 PM
